Furnace Pros Utah logo Furnace Pros Utah
Get Estimate

Furnace Repair in Orem Done Right the First Time

When your furnace quits in Orem, you need a fix that holds. Furnace Pros Utah handles furnace repair in Orem for homes from Cascade to Cherry Hill, diagnosing igniters, flame sensors, and blower motors with real testing gear, not guesswork. We stock common parts on the truck, so most repairs finish in one visit. Call and we'll get your heat back on.

Call Now Book Service
Emergency response Jobs completed Average rating
Licensed Licensed & Bonded
Fully Insured Insured & Bonded
24/7 Emergency Same-Day Response
Warranty Backed Workmanship Guaranteed in Orem
Orem

Furnace Repair in Orem You Can Count On


Furnace Repair in Orem is the work of getting heat back into a home fast, safely, and code-correct, and it's what our technicians do across Utah County every week. We work the full spread of Orem, from the older brick ramblers near downtown to the newer builds out by Vineyard. Winter here drops into the teens, and a furnace that short cycles or blows cold air turns a normal week into a miserable one. We carry the parts that fail most: igniters, thermocouples, flame sensors, capacitors, and gas valves. Our techs test with a manometer and multimeter before quoting anything, so you know what's actually wrong. Whether it's a gas furnace, an electric unit, or a high-efficiency model, we diagnose it, explain it plain, and fix it. One call covers furnace repair, tune-ups, and replacements across Orem and the surrounding valley.

  • Locally licensed and insured in Orem
  • Same-day diagnostics and written estimates
  • Real workmanship warranty in writing
  • Background-checked, in-house technicians

Furnace Services Available in Orem

Orem furnace repair demand spikes hard from November through February, when overnight lows hit the teens and older systems start failing. We run emergency calls seven days a week and schedule tune-ups before the first hard freeze. If you're searching for a furnace tune-up near me in Orem before winter, book early, because our calendar fills fast in October and November.

Furnace Repair

Furnace Repair

Our core Orem service covers no-heat calls, short cycling, and strange noises. We test the igniter, flame sensor, and gas valve with a multimeter and manometer, then repair or replace the failed part. Most Orem homes get heat back the same day.

View Details
Furnace Installation

Furnace Installation

New furnace installs in Orem homes, from west-side new builds to replacements in older downtown houses. We size the unit to your square footage and ductwork, pull the permit, and commission it with a combustion analyzer so it runs clean and safe.

View Details
Furnace Replacement

Furnace Replacement

When repair costs climb past half the price of a new unit, replacement makes more sense. We haul out the old furnace, install a Carrier, Trane, or Lennox model, and recycle the old equipment. Orem replacements usually finish in one day.

View Details
Emergency Furnace Repair

Emergency Furnace Repair

No heat at 2 a.m. in an Orem winter is an emergency. We answer 24/7 and dispatch a tech with common parts on board. Most emergency calls in Orem get a same-night diagnosis and repair when the part is on the truck.

View Details
Furnace Cleaning

Furnace Cleaning

Dust, pet hair, and Utah's spring pollen clog burners and blowers. We pull the burners, clean the heat exchanger, and swap your furnace filter. Orem homes with pets or long duct runs see the biggest airflow gains from this service.

View Details
Furnace Tune-Up

Furnace Tune-Up

A fall tune-up in Orem covers a 21-point check: gas pressure, flame color, igniter wear, blower amp draw, and filter condition. We adjust the burners and test with a flue gas analyzer. It's the cheapest way to avoid a mid-January breakdown.

View Details
Furnace Maintenance

Furnace Maintenance

Yearly maintenance keeps Orem furnaces running through the cold months. We track your unit's service history, replace worn capacitors and filters, and flag parts before they fail. Maintenance customers get priority scheduling when something does break.

View Details
Gas Furnace Repair

Gas Furnace Repair

Gas furnace work in Orem means checking the gas valve, thermocouple, and heat exchanger for cracks. We leak-test every connection and verify combustion with a flue gas analyzer. If your gas furnace smells odd or won't light, call before running it again.

View Details
Electric Furnace Repair

Electric Furnace Repair

Electric furnaces in Orem fail at the heating element, sequencer, or blower motor. We test each element with a clamp meter and check the breaker and wiring. Repairs are usually straightforward once we isolate the failed component.

View Details
High-Efficiency Furnace Repair

High-Efficiency Furnace Repair

High-efficiency furnaces in Orem's newer west-side homes need techs who understand condensing systems. We check the secondary heat exchanger, condensate drain, and intake piping. A clogged drain line is the most common cause of no-heat calls on these units.

View Details
Furnace Repair in Orem
Service · #1

Furnace Repair in Orem


When your furnace quits in Orem, Furnace Pros Utah responds fast with expert furnace repair in Orem. From the tree-lined streets of Carterville to newer builds near University Place, we diagnose no-heat calls, short cycling, and strange noises daily. Our technicians understand how Utah Valley's hard water, dusty canyon winds, and freezing January nights stress heating systems. We stock common parts and restore warmth quickly.

Common Orem Furnace Failures

Orem homes from the 1970s near Orem High often face cracked heat exchangers, while newer Vineyard-adjacent builds see ignitor and flame sensor issues. Our furnace repair Orem techs test gas pressure, airflow, and thermostat calibration to pinpoint the exact fault before recommending parts.

Same-Day Repair Availability

We schedule same-day furnace repair in Orem for most calls before 2 PM, covering neighborhoods like Sunset Heights and Lakeview. Vans carry universal ignitors, blower motors, and control boards so your family isn't waiting overnight in a cold house.

Repair Versus Replace Guidance

If your system is 15+ years old and facing a $1,200 repair, we walk you through honest replace-or-fix math. Many Orem homeowners near Utah Valley University choose repair when the heat exchanger is sound and efficiency still meets their budget.

  • Full diagnostic on no-heat, short-cycling, and blower faults
  • Gas pressure, flame sensor, and ignitor testing on site
  • Heat exchanger inspection for cracks and carbon monoxide risk
  • Written repair estimate before any parts are ordered

Furnace Installation in Orem


Planning furnace installation in Orem means matching BTU output, duct design, and efficiency to your specific home. Furnace Pros Utah handles load calculations, permits, and final inspections for houses from Windsor Park to the foothills near Cascade. We size equipment for Utah Valley's 6,500+ heating degree days so you get even warmth without oversized cycling or wasted gas.

  1. 01

    Proper Load Calculation First

    We measure square footage, window orientation, insulation, and duct leakage before quoting any furnace installation Orem project. Skipping this step is why many Orem homes end up with oversized units that short-cycle and wear out early.

  2. 02

    Permits and Inspection Support

    Orem City requires mechanical permits for furnace changeouts. We pull permits, coordinate with the inspector, and provide documentation, so your new system passes the first time and your warranty stays valid.

  3. 03

    Duct and Venting Upgrades

    Older Orem homes near Geneva Road often have undersized returns. During installation we evaluate static pressure and recommend duct corrections or a fresh PVC vent run for high-efficiency condensing furnaces.

  • Manual J load calculation tailored to your Orem home
  • Mechanical permit filing and inspection coordination included
  • New gas line, flue, and condensate routing as needed
  • Post-install combustion analysis and airflow balancing
Furnace Installation in Orem

02 / 10

Service

5+ YEARS · OREM

Furnace Replacement in Orem

When repairs pile up, furnace replacement in Orem often saves money long-term. Furnace Pros Utah removes old equipment, hauls it away, and installs a correctly sized unit the same day in most cases. We serve Orem neighborhoods like Northridge, Bonneville, and Sharon Park, where many original furnaces from the 1990s are now past their safe service life.

Signs Replacement Makes Sense

Repeated repairs, rising gas bills, yellow burner flames, or a furnace older than 18 years all point toward replacement. Orem homeowners near the Scera Shell often notice uneven heating before the system finally fails mid-winter.

Choosing Efficiency Ratings

We explain AFUE ratings in plain terms. A 96% two-stage furnace suits most Orem homes, but a single-stage 80% unit can still make sense for rentals near UVU where upfront cost matters more than long-term savings.

Disposal and Cleanup

Old furnace removal, refrigerant-free disposal, and full site cleanup are included. We protect flooring, haul away the old cabinet, and leave your Orem mechanical room cleaner than we found it.

  • Same-day removal and installation for most Orem homes
  • Old equipment haul-away and responsible disposal included
  • Efficiency and rebate guidance for Utah Valley programs
  • Thermostat replacement and system commissioning at finish
Emergency Furnace Repair in Orem

Emergency Furnace Repair in Orem


A furnace failure at 11 PM in Orem can't wait until morning. Furnace Pros Utah offers emergency furnace repair in Orem with rapid dispatch across neighborhoods like Timpanogos, Aspen, and the State Street corridor. We prioritize no-heat calls during hard freezes, especially for households with infants, elderly residents, or medical needs. Call and we roll a stocked van your way.

24/7 emergency dispatch for Orem no-heat furnace calls

Promise

“Call our line and a dispatcher confirms your Orem address, furnace brand, and symptoms. We send the nearest on-call technician with common parts, aiming to have heat restored the same night whenever possible.”

— Orem customer
After-Hours Dispatch Process +

Call our line and a dispatcher confirms your Orem address, furnace brand, and symptoms. We send the nearest on-call technician with common parts, aiming to have heat restored the same night whenever possible.

Safety Checks on Arrival +

Emergency calls get a gas leak and carbon monoxide check first. If we detect unsafe conditions in your Orem home, we shut down the system, ventilate, and explain next steps before any repair begins.

Temporary Heat Options +

If a part must be ordered, we set up safe temporary heating or advise on space heater placement for Orem families until the permanent fix arrives, usually the next business day.

  • 24/7 emergency dispatch for Orem no-heat furnace calls
  • Carbon monoxide and gas leak safety verification on arrival
  • Stocked vans with ignitors, sensors, and blower motors
  • Clear after-hours pricing confirmed before work begins
Furnace Cleaning in Orem
Service · #5

Furnace Cleaning in Orem


Dust, pollen, and canyon debris build up inside Orem furnaces faster than most homeowners realize. Furnace Pros Utah provides thorough furnace cleaning in Orem that restores airflow and reduces allergens circulating through your home. We serve neighborhoods near Canyon View Park and the Orem Family Fitness Center, where spring winds push fine silt into return ducts and blower compartments.

Blower and Burner Cleaning

We pull the blower assembly, scrub caked dust from fins, and vacuum the burner compartment. Clean burners mean steadier flames and fewer nuisance shutdowns in Orem homes during January cold snaps.

Flame Sensor and Ignitor Care

A dirty flame sensor is the top cause of one-second furnace runs. Our furnace cleaning Orem service gently polishes sensors and verifies microamp readings so your system stays lit reliably.

Filter and Duct Considerations

We inspect your filter slot and nearby duct runs for gaps pulling attic or crawlspace air. Orem homes with older flex duct often benefit from sealing before the next heating season.

  • Full blower wheel and burner compartment deep cleaning
  • Flame sensor polishing and ignition sequence verification
  • Filter replacement with MERV rating guidance for Orem
  • Before-and-after airflow readings documented for you

Furnace Tune-Up in Orem


A fall furnace tune-up in Orem prevents the mid-winter breakdown that always seems to happen on the coldest night. Furnace Pros Utah performs a multi-point tune-up covering combustion, airflow, electrical, and safety checks. We schedule appointments across Orem, from the neighborhoods near Mountain View High to the condos along I-15, so your system is ready before the first hard freeze.

  1. 01

    What a Tune-Up Includes

    Our furnace tune-up Orem checklist covers gas pressure, flame color, temperature rise, amp draw, capacitor health, and flue draft. We clean components, tighten connections, and document every reading for your records.

  2. 02

    Best Time to Schedule

    September and October fill fastest in Orem. Booking early ensures your system is inspected before the heating season rush, and any worn parts can be ordered without emergency pricing.

  3. 03

    Efficiency Gains You Can Expect

    A properly tuned furnace can recover 5-10% of lost efficiency. Orem homeowners often see lower gas bills in December and January simply from corrected airflow and clean burners.

  • 21-point tune-up with combustion analysis and temperature rise
  • Capacitor, ignitor, and flame sensor health testing
  • Airflow verification and filter replacement included
  • Written report with photos of every checked component
Furnace Tune-Up in Orem

06 / 10

Service

5+ YEARS · OREM

Furnace Maintenance in Orem

Ongoing furnace maintenance in Orem extends equipment life and keeps warranties intact. Furnace Pros Utah builds maintenance plans around Utah Valley's specific demands: dry air, temperature swings, and long heating seasons. We serve homeowners near the Orem Public Library and throughout the Cherry Hill area, keeping systems running quietly and efficiently year after year.

Seasonal Maintenance Schedule

We recommend two visits yearly for Orem homes: a fall heating inspection and a spring cooling check if you have AC. Consistent furnace maintenance Orem customers see fewer emergency calls and longer equipment lifespan.

Warranty Protection Value

Most manufacturers require annual professional maintenance to honor parts warranties. We log each visit with date, readings, and technician notes, so your Orem furnace warranty stays valid if a major component fails.

Priority Scheduling Benefits

Maintenance plan members get front-of-line scheduling during Orem cold snaps. When everyone's furnace fails at once, our existing customers are dispatched first with no overtime charges.

  • Annual multi-point inspection with documented readings
  • Warranty-compliant service records for your furnace
  • Priority dispatch during Orem peak heating emergencies
  • Reminder scheduling so you never miss a service window
Gas Furnace Repair in Orem

Gas Furnace Repair in Orem


Gas furnace repair in Orem requires careful attention to combustion, venting, and gas pressure. Furnace Pros Utah technicians are trained on all major brands and follow Utah code on every repair. From the older homes near Geneva Resort to newer construction in the Vineyard area, we diagnose gas valve failures, pilot issues, and draft problems safely and correctly.

Gas valve testing, adjustment, and replacement when needed

Promise

“Incorrect manifold pressure causes weak flames and sooting. We measure inlet and outlet pressure, test the gas valve, and adjust to manufacturer specs for your Orem home's altitude and gas supply.”

— Orem customer
Gas Valve and Pressure Issues +

Incorrect manifold pressure causes weak flames and sooting. We measure inlet and outlet pressure, test the gas valve, and adjust to manufacturer specs for your Orem home's altitude and gas supply.

Ignition and Pilot Problems +

Standing pilots and electronic ignitors both fail over time. Our gas furnace repair Orem service replaces faulty ignitors, cleans pilot orifices, and verifies the full ignition sequence before leaving.

Venting and Combustion Safety +

Blocked flues or improper slope can spill carbon monoxide into your Orem home. We inspect vent connectors, test draft, and confirm combustion air openings meet code before restarting the furnace.

  • Gas valve testing, adjustment, and replacement when needed
  • Ignitor, pilot, and flame sensor repair on all brands
  • Combustion analysis with carbon monoxide safety verification
  • Vent and flue inspection to confirm proper draft
Electric Furnace Repair in Orem
Service · #9

Electric Furnace Repair in Orem


Electric furnace repair in Orem involves different diagnostics than gas systems: heating elements, sequencers, relays, and high-amperage circuits. Furnace Pros Utah handles all of it. We serve Orem neighborhoods like Sunset and Lakeview where electric furnaces and heat pumps are common in newer, all-electric builds and where homeowners want fast, safe restoration of heat.

Heating Element Failures

Individual elements burn out over time, causing weak or no heat. We ohm-test each element, replace failed coils, and verify amperage draw so your Orem electric furnace returns to full output.

Sequencer and Relay Issues

Sequencers stage elements on and off to prevent breaker trips. When they stick, heat stops or the breaker trips repeatedly. Our electric furnace repair Orem techs test and replace sequencers and relays as needed.

Breaker and Wiring Checks

Electric furnaces pull 60-100 amps. We inspect breaker sizing, wire gauge, and terminal torque in your Orem home to catch loose connections that cause overheating or nuisance trips.

  • Element-by-element ohm testing and replacement
  • Sequencer, relay, and contactor diagnostics and repair
  • Breaker, wiring, and disconnect inspection for safety
  • Amp draw verification after every electric furnace repair

High-Efficiency Furnace Repair in Orem


High-efficiency furnace repair in Orem demands technicians who understand condensing technology, PVC venting, and secondary heat exchangers. Furnace Pros Utah is trained on 90%+ AFUE systems from all major brands. We serve Orem homeowners near Cascade and Northridge whose modern furnaces need specialized diagnostics, not guesswork, when performance drops or error codes appear.

  1. 01

    Condensate System Problems

    Condensing furnaces produce acidic water that must drain properly. Clogged traps or frozen lines are common in Orem winters. We clear blockages, verify slope, and check neutralizer condition on every high-efficiency furnace repair Orem call.

  2. 02

    Secondary Heat Exchanger Issues

    The secondary exchanger captures latent heat but can corrode or crack. We inspect it visually and with combustion analysis, catching failures early before they affect efficiency or safety in your Orem home.

  3. 03

    Error Codes and Control Boards

    Modern furnaces store fault codes that guide diagnosis. We read and interpret codes, test control board outputs, and replace failed boards with OEM parts to preserve your system's efficiency and warranty.

  • Condensate trap cleaning and drain line freeze prevention
  • Secondary heat exchanger inspection and combustion testing
  • Control board diagnostics with OEM replacement parts
  • PVC venting inspection for proper slope and termination
High-Efficiency Furnace Repair in Orem

10 / 10

Service

Residential Furnace Repair

Residential Furnace Repair in Orem

Orem's residential mix ranges from mid-century homes near downtown to newer builds on the west side, and each type has its own furnace quirks. Families here need heat that works reliably through cold winters, and a furnace failure isn't just uncomfortable, it can freeze pipes and disrupt daily life. We handle residential furnace repair, tune-ups, and replacements across Orem, with same-day service for most calls. Whether you're in a starter home near UVU or a larger house on the east bench, we size the repair to your system and your budget.

  • Same-Day Furnace Repair — We diagnose and repair most residential furnace problems in Orem the same day. Our trucks carry igniters, flame sensors, capacitors, and blower motors, so common failures get fixed on the first visit. If a part needs ordering, we tell you upfront and schedule the return.
  • Annual Furnace Tune-Up — A yearly tune-up keeps your Orem home's furnace running efficiently and catches small issues before they become breakdowns. We clean the burners, test the igniter and gas pressure, and replace your furnace filter. It's the best way to avoid a mid-winter emergency.
  • Furnace Replacement — When your furnace is past its prime, we install a new high-efficiency unit sized for your home. We handle the permit, haul away the old equipment, and commission the new system with a combustion analyzer. Most Orem replacements finish in one day.
  • Emergency No-Heat Service — If your furnace quits on a cold Orem night, we answer 24/7 and dispatch a tech with common parts on board. We prioritize no-heat calls during cold snaps and keep you updated on arrival time. Most emergency repairs are completed the same night.
Commercial Furnace Repair

Commercial Furnace Repair in Orem

Orem's commercial buildings, from retail along University Parkway to offices near State Street, depend on reliable heat to keep employees and customers comfortable. A furnace failure during business hours can mean lost revenue and unhappy tenants. We handle commercial furnace repair and maintenance for Orem businesses, with scheduling that works around your operating hours. If you need commercial furnace repair in Orem that won't disrupt your day, we can schedule early morning or after-hours service.

Retail storesRestaurantsOffice buildingsProperty managementLight industrial

Common Furnace Problems in Orem

Orem's climate and housing mix create a predictable set of furnace problems. Cold canyon winds, dry air, and a split between older and newer homes mean we see the same failures repeat across the city. Knowing what's common helps you spot trouble early and get it fixed before a breakdown.

Igniter and flame sensor failures

Orem's hard freeze cycles stress igniters, and dust from dry air coats flame sensors. Both fail more often here than in milder climates, especially on furnaces that sit idle all summer.

Clogged condensate lines in high-efficiency furnaces

West-side Orem homes with high-efficiency furnaces produce condensate that can freeze in the drain line during cold snaps. Mineral buildup from hard water makes clogs worse.

Cracked heat exchangers in older furnaces

Many Orem homes near downtown have furnaces that have run 15 or more winters. Years of heating and cooling cycles cause metal fatigue, and cracks can leak carbon monoxide into the home.

Blower motor and capacitor failures

Orem's temperature swings make furnaces cycle more, which wears out blower motors and capacitors faster. A failing capacitor can stop the blower entirely, leaving the furnace to overheat.

Signs You Need Furnace Repair in Orem

Orem winters don't give you much margin when a furnace starts acting up. If you're wondering when to call for furnace repair in Orem, these five signs are the ones we see most often. Any one of them is worth a call before the problem gets worse.

  • Furnace blowing cold air

    If the blower runs but the air is cold, the burner isn't lighting. Common causes are a failed igniter, a dirty flame sensor, or a gas valve issue. In Orem's cold months, this needs same-day attention.

  • Furnace short cycling

    A furnace that turns on and off every few minutes is usually overheating or struggling with airflow. A clogged filter or failing flame sensor is often the culprit. Short cycling wears out parts fast and raises your gas bill.

  • Furnace making banging noise

    Banging or booming on startup can mean delayed ignition, where gas builds up before lighting. It's a safety concern. If you hear it, shut the furnace off and call for service.

  • Furnace leaking water

    High-efficiency furnaces produce condensate, and a clogged drain line can cause water to pool around the unit. In Orem's freezing temps, the line can ice up. Left alone, it can damage the furnace and your floor.

  • Furnace blower not working

    If the furnace lights but no air moves, the blower motor or capacitor has likely failed. Without airflow, the heat exchanger can overheat. This is a repair that shouldn't wait.

Furnace Repair Pricing in Orem

Typical 2026 furnace repair pricing in Orem runs $180 to $450 for common fixes like igniters, flame sensors, and capacitors, including the service call. More involved repairs, like a gas valve or blower motor replacement, can run $500 to $900 depending on the part and labor. We quote the price before we start, and there's no charge for the estimate. If you're comparing furnace repair costs in Orem, ask whether the quote includes the diagnostic fee and parts, because some shops add those separately.

Basic Service

$89 starting · per visit

  • Diagnostic visit
  • Written estimate
  • Same-day scheduling
  • 30-day warranty
Book This Plan

Premium Care

$499 annual plan

  • Two scheduled inspections
  • Priority emergency response
  • Discounted parts and labor
  • 5-year workmanship warranty
Book This Plan
  • Part cost and availability — Common parts like igniters and thermocouples are inexpensive and usually on the truck. Specialty parts for high-efficiency or older units may cost more and take longer to source, which affects the total.
  • System age and type — Older furnaces often need more labor because fasteners are rusted and access is tight. High-efficiency units require more diagnostic time, which can add to the labor portion of the bill.
  • Time of call — Emergency calls after hours or on holidays carry a higher rate than standard business-hour service. If your Orem furnace fails at 2 a.m., expect a higher service call fee, but the repair itself is priced the same.

Navigating Orem: Landmarks We Use

Orem's layout is easy to work once you know the landmarks. We route techs using University Parkway, State Street, and I-15 as the main spines, then cut into neighborhoods using schools, parks, and the mall as reference points. If you're giving directions, mentioning a nearby landmark helps us find you faster, especially in the older east-side streets where addresses can be tricky.

Utah Valley University

UVU anchors the north-central part of Orem. We use it as a reference point for calls in the surrounding student and residential neighborhoods, where street parking and shared driveways are common.

University Place Mall

University Place sits along University Parkway near the center of Orem. It's a useful orientation point for calls in the surrounding commercial and residential blocks, and it helps us pick the fastest route during busy traffic hours.

Orem Public Library

The Orem Public Library is near Center Street and State Street downtown. We use it to orient calls in the older downtown grid, where streets are narrower and some homes have rear-alley access.

Provo River

The Provo River runs along Orem's northeast edge. Homes near the river corridor sometimes deal with higher humidity and drainage issues, and the river helps us route to neighborhoods on that side of town.

Coverage across Orem & Utah County

84097840578405884059

Plus surrounding Utah County neighborhoods, with same-day routing on most appointments.

How Orem Seasons Affect Your Furnace

Orem's four seasons each put different demands on your furnace. Fall and winter are when most repairs happen, but spring and summer are the right time to catch problems before they strand you in the cold. Here's what to expect through the year.

Spring

As temperatures warm, your furnace shifts to light use. This is when lingering issues from winter, like a weak igniter or a dirty filter, show up as inconsistent heating. Spring is also a good time to clean dust and pollen from the blower compartment.

Tip: Schedule a post-winter check and replace your furnace filter. It's a cheap way to catch wear before next season.

Summer

Your furnace sits idle, but that doesn't mean it's fine. Dust settles on burners, and condensate lines can dry out or clog. Summer is the best time to book maintenance without waiting in a cold-weather queue.

Tip: Book a summer tune-up now. Our calendar is open, and you'll avoid the fall rush.

Fall

The first cold snap in Orem usually hits in October or early November, and that's when we see a surge in no-heat calls. Furnaces that ran fine last spring often fail on the first cold morning. Getting a tune-up before the freeze prevents most of these breakdowns.

Tip: Schedule your fall tune-up by early October. We test the igniter, gas pressure, and blower before the heating season starts.

Winter

Orem winters bring overnight lows in the teens and occasional single digits. Furnaces run constantly, and any weak part is likely to fail. Emergency calls spike during cold snaps, and parts for older units can be harder to source quickly.

Tip: Keep your filter clean and watch for short cycling or cold air. If something seems off, call before it quits entirely.

FAQs About Furnace Repair in Orem

Real answers from our team for the questions we hear most often before a job starts.

How much does furnace repair cost in Orem?
Most furnace repairs in Orem run $180 to $450 in 2026, including the service call and common parts. Repairs involving a gas valve or blower motor can run $500 to $900. We quote the price before starting, so you know the cost upfront.
How fast can you get to my Orem home for emergency furnace repair?
We answer emergency calls 24/7 and typically arrive within 60 to 90 minutes for Orem addresses, depending on traffic and weather. During a cold snap, call early in the day for the fastest response. We text you when the tech is en route.
Do you repair high-efficiency furnaces in Orem?
Yes. We repair high-efficiency furnaces across Orem, including condensing units in newer west-side homes. Common issues include clogged condensate drains, pressure switch faults, and intake piping problems. Our techs carry a combustion analyzer and flue gas analyzer for these systems.
What brands of furnaces do you service in Orem?
We service all major brands, including Carrier, Trane, Lennox, Goodman, Rheem, York, Bryant, and American Standard. Our trucks carry common parts for these brands, which means faster repairs. If you're unsure of your furnace brand, we can identify it during the diagnostic.
Should I repair or replace my furnace in Orem?
If your furnace is under 15 years old and the repair costs less than half the price of a new unit, repair usually makes sense. If it's older, has a cracked heat exchanger, or needs multiple repairs in a season, replacement is the better investment. We'll give you both options with pricing.

Get Furnace Repair in Orem Today

If your furnace is blowing cold air, short cycling, or making noise, don't wait for it to quit entirely. We're licensed, insured, and ready to help Orem homeowners get their heat back fast. Call us at (866) 961-2544 for same-day service, or book online and we'll confirm your arrival window. One call and we'll take it from there.

Call Now Send a Message

Get in Touch With Our Team

Call us at (866) 961-2544 any time, day or night. Our dispatch line is staffed 24/7 for emergency no-heat calls, and standard appointments run Monday through Friday, 8 a.m. to 6 p.m. We serve every corner of Utah, from the Wasatch Front to the rural counties. Book online or by phone and we'll confirm your window fast.

Furnace Pros Utah


  • Address

    Utah

  • Hours

    Mon–Fri: 7AM – 7PM
    Sat: 8AM – 4PM
    Sun: Emergency Only
    24/7 Emergency Available

Call (866) 961-2544 Get Quote
Call Quote